1. Tools SawTape measure80 grit sandpaper and/or sanderNail gun or hammerSquareClampsDrill DriverPaint brush or old t-shirtSupplies1 - 1 x 10 x 61...

2. Using the two ends cut an angled cut from each top corner. I cut a 30 degree angle to leave 2 1/2 inches at the top and 5 1/8 inches for the sides.

3. Using a 1 inch forstner bit drill a hole approximately 1/4-1/2 inch deep the top end. The hole left about 1/2 inch from the top.After this I san...

4. Apply wood glue along the edge of two of the 1 x 4s. Using a square to help with placement and clamps to hold in place, nail the two 1 x 4 ends...

5. Attach the ends and the dowel. Place one of the 1 x 10 ends perpendicular to the middle section, glue and nail it together. Then before attachin...

6. Apply stain and allow to dry. I used Rust-oleum Stain in Kona then sanded the edges to give it an aged worn look. To add a personal touch I adde...

7. Thank you for checking out this build. If you would like to see a couple more of my builds out of wood check out this Farmhouse Wood Tray and th...